Conservation in the Local Community…

One of my recent contracts has been for the lovely community and conservation minded chaps at Chiltern Rangers in High Wycombe. The MD, John Shaw, contacted me a couple of months ago with a notion of installing a graded track approximately 300m long around Funges Meadow Nature Reserve to allow people of all abilities to benefit from the nature reserve. Some regular readers of my blog (if there are any) may remember I carried out some conservation and habitat enhancement at the reserve back in March, which I blogged about in Funges Meadow Back Stream Enhancement. So I sat down and scratched my head a few times to come up with something that would meet his criteria.

Funges Meadow Aerial
Funges Meadow Nature Reserve from the air in the early 2000’s.

However it wasn’t as easy as it sounded. John wanted to construct something that was in keeping with the wildlife site: it had to be as unobtrusive as possible, easy to maintain and allow mowers to cross it, within a strict budget, environmentally friendly and also be wide enough and level enough to allow wheel chairs, buggies and individuals of all abilities to access all areas of the nature reserve whilst still looking natural. You can see the previous uneven grassy track in the aerial photograph above. So after some serious head scratching, I came up with a plan!

John wanted a perimeter track laid around the pond in the middle of the reserve, with a spur leading off to the dipping platform on the banks of the back stream (adjacent to one of the gravel riffles I installed in March) and another spur leading off to the boardwalk which crosses the back stream on the main pedestrian entrance to the site.

Fortunately the substrate around the reserve is chalk and flint, meaning the ground under the top 150mm of top soil is extremely solid. This was fortunate, as i meant that any shallow excavations took out the 150mm layer of top oil, and presented a nice solid base for the track.


The terrain within the nature reserve is, well – natural. This meant it was far from level and a little ingenuity had to be employed to ensure that the track blended in, whilst still allowing wheelchair and buggy access on the inclines. Access to the site for HGV’s and heavy plant is also limited, which narrowed the possibilities even more. My final specification for the contract was:

Construct 1,200mm wide, approximately 310m long circular path around pond at above site, including a 1,200mm wide, approximately 30m long spur path leading from the circular path to the dipping platform situated on the bank of the Back Stream within the footprint of the site.

Construct 2,000mm wide, approximately 20m long track leading from road access gates on Bowden Lane to circular path around pond suitable for vehicle access.
Grade the ground and terrain along the footprint of the path sympathetically with 5 ton 360 tracked excavator where needed to allow pedestrian and wheelchair access to all areas of the site via the path.

Paths to be constructed by excavating 150mm deep by 1,200mm wide track along the desired route, laying 1,500mm wide 100GSM weed prevention membrane, backfilled with scalpings aggregate (or similar) with 5 ton 360 tracked excavator and 3 ton 4WD dumper, and compacted with 1.2m wide sit-on vibrating roller. At appropriate locations, paths may be required to be edged with 22mm x 150mm x 3,600mm treated timber, supported by 75mm x 75mm x 1,500mm treated posts to prevent subsidence.

Path to be finished level with adjacent terrain level where possible (excluding ramp areas) to allow mowers to traverse across. Spoil from path excavation to be used for profiling on site as directed by Chiltern Rangers.

I spent a week on site with a small team, using excavator, dumper and roller to create a 1.4m wide, circa 350m long track around the nature reserve which blended into the surrounding terrain, wouldn’t break up under pedestrian and light vehicle use, but which would ‘green up’ to allow the site too look as nature-like as possible. In some areas, the inclines had to be extended with timber edging to keep the track on a suitable gradient. This edging was sunk into the ground to allow John and his team to traverse the track with mowers when they maintain the site through the year.

The excavated spoil was all used on site to create new habitat and variations in the terrain to suit all manner of wildlife. All the heavy plant used on site was the smallest the work could be completed with, and was as environmentally friendly as possible – including being filled with biodegradable fluids. The photos below were taken on the day of completion.

All the Best,

Matt – ACC Contracting

Work Experience / Employment Offered

A short-term employment opportunity for one person is offered between 23rd May 2016 and 27th / 28th May 2016 working for ACC Contracting on a contract site in High Wycombe, Buckinghamshire. Good remuneration offered and would be ideal for construction, agricultural or conservation student looking to gain experience whilst being paid. This work will involve a mixture of small scale construction, groundworks, working with powered plant and manual handling.

Required skills – ability to work outside unaided and unsupervised, honest, hard working, fit, experience of working outside and around powered plant and common sense!

Desirable skills – experience of groundworks, ability to operate small powered plant (5t excavator, 3t dumper, compact tractor, ect), driving licence and own transport.

Please email Matt on for more information or to apply.

Position now provisionally filled. Thank you for the interest. Other opportunities will be offered in the future.

Annual Paddock Maintenance

Paddock maintenance isn’t complicated, arduous or particularly hard – it just needs a quick half hour inspection and walk-over around this time of year (early to mid spring). What may look green from your house may well be a bit sparse, muddy and damaged when you get up close and personal with it!

  • Is the ground poached, rutted and damaged?
  • Are there any bare areas devoid of grass?
  • Does any grass that is present look vibrant & healthy?
  • What evidence is there of any weeds (ragwort, buttercup, bramble, dock)?
  • Does the ground look compacted or is it badly churned up in places (usually high traffic areas)?

The following is some simple advice about paddock maintenance and management, and all services I provide. I am happy to negotiate on prices for bulk work requests from one off harrowing, through to rotivating, harrowing, reseeding/feeding and rolling.

Collect horse droppings regularly (preferably every day, particularly if you have a high horse density per paddock). Don’t be tempted to spread them around the paddock by harrowing. I don’t advocate using harrows as a replacement for ‘poo picking’ in horse paddocks – it’s much more beneficial to collect the horse droppings on a daily basis than it is spread it around the paddock on a regular basis, especially at this time of year with the potential to distribute worms around the paddocks.

Book paddocks in for harrowing a minimum of twice a year (spring and autumn) to remove dead thatch and moss from the grass sward, improve grass growth through aeration, reduce compaction caused by horse hooves and help improve surface drainage. Chain harrowing is usually all that is required as it both levels the surface and removes thatch and moss. In some cases, spring tine / weed tine harrowing may also be required if weeds need to be removed, the moss and thatch within the grass sward is particularly thick or reseeding is required. Spring tine harrowing creates the best tithe for seeding, and can usually be combined with feeding / over seeding at the same time to save on cost.

I see people on a mini-tractor or quad bike dragging trailed chain harrows at warp speed 9 and wondering why the harrow is bouncing around and achieving very little. The design of chain harrows goes back hundreds of years to when they were pulled by horses – at a walking pace! I use ‘mounted’ chain harrows as opposed to trailed chain harrows, as extra weight can be used on mounted harrows to get maximum efficiency, unlike trailed harrows. I can also back into awkward corners and level uneven ground a lot more effectively with ‘mounted’ chain harrows than is possible with trailed ones.

Rotate horses around your paddocks. Try to give each paddock a rest for at least three to four weeks per year during the spring and summer. If grass is grazed flat constantly then gradually the grass will become weaker as the roots are not able to recharge their batteries by photosynthesis from the leaves and they may start to die leaving bare patches. These bare patches allow weeds to germinate and take over areas of the paddock, as well as being notoriously compacted and hard in the warmer summer months.

Book paddocks in for fertilisation / feeding. Whilst you don’t want too much or too thick grass in equine paddocks, you are asking a lot of any paddocks that are heavily grazed all the time to keep producing grass. A regular annual fertiliser feed will help maintain a steady growth of grass, and give it that little helping hand it needs.

Regularly inspect the paddocks and treat for weeds as necessary – sometimes it’s just a case of pulling up a few Ragwort plants or docks. Badly infested paddocks are usually the result of overgrazing and winter poaching causing bare patches which weeds then germinate in. The best way to keep weeds at bay is an actively growing and healthy grass sward, but spraying can be required, especially for persistent and stubborn weeds such as bramble, nettle, dock and buttercup.

Poached ground is caused by allowing horses to remain in paddocks that have become too wet and suffer from a lack of drainage (or exceptionally wet weather). This may be due to having no other paddocks to use, ground compaction, or due to the soil substrate. It will be especially noticeable in areas of paddocks that are high traffic areas – gateways, water drinkers, shelters and areas where horses are fed. The easiest way to avoid this is by restricting horse access to wet paddocks (or areas within wet paddocks) or rotating paddocks through the winter. Many people have very limited ground and this may not always be practical or possible.

Rolling has to be carried out at the right time. If rolling is carried out when the ground is too wet, the damage will be made worse and the roller will simply clog up with mud. If rolling is carried out too late, the ground will be too hard for the roller to have any effect. For ground that has been badly damaged and dried, rolling on its own will probably not be sufficient, and treatment with a rotivator or power harrow may be required to level the ground properly. These will level off badly damaged and poached areas that have dried and become too compacted for the harrow to level. Paddocks which have suffered lots of damage through the winter may want over-seeding and then rolling to press in the seed. I would only recommend over-seeding if you can keep horses off the seeded area until the new grass has germinated well. Rolling, by it’s very nature, compacts the ground as well as leveling and pressing in seed unfortunately, which is why there should never be a regime of routine rolling of paddocks. Instead, rolling should be undertaken only when required to keep compaction to a minimum.

If there is already some spring grass growth, then rolling the crowns or seeds of the grass to crush them encourages ‘spreading’ of the grass seeds and so maximises spring growth (effectively doing nature’s work for her). Similarly, if the grass has grown well, topping it with a tractor mounted topper can spread any grass seed which has occurred naturally, as well as taking out any weeds before they germinate.

Hard and compacted ground is predominantly caused by overgrazing or have too many horses per acre. A slitter or aerator can be used behind the tractor to aerate and de-compact the top 150mm – 300mm of ground. This will improve drainage and let air, water and nutrients reach the roots of the grass, improving the spring growth and reducing recovery time. In more severe cases I can use a tractor-mounted subsoiler to reduce compaction, which can be better in gravel or extremely compacted areas, and will improve surface and sub-surface drainage. The sub-soiler can also be used to lay drinker / irrigation pipes into the ground with a minimum of disturbance.

I am happy to provide all the services mentioned above with a compact tractor than can be trailered to sites behind a 4×4, or much larger tractors and equipment that can be driven to sites. Please contact me for quotes and prices – or see ACC Contracting Services & Products.

All the Best,

Matt – ACC Contracting

Spring Cleaning Paddocks…

Spring has (just about) sprung in the south and now is the time that I get busy giving grazing paddocks some tender loving care so they can see us through the summer months when the weather (and ground) is dryer. It’s the time of year when harrowing, rolling and seeding / feeding paddocks should be done as you do reap the benefits later in the year and means that the grazing will be plentiful through the summer. As you can see, we suffered from quite a wet winter this year so I shall be undertaking quite a lot of repair work to my own paddocks.

I use both mounted spring tine harrows and mounted chain harrows depending on the condition of the paddocks and what I want to achieve. Depending on which harrow you use (or both), harrowing removes any dead grass and thatch, breaks up the obligatory muddy lumps, smooths out winter hoof marks and gives the grass the best start in the spring without too much competition with the moss and weeds. It also means that those areas that have been badly poached (churned up) by horses gallivanting around get aerated and the divots and hoof marks smoothed to a certain degree.

I see people on a tractor or ATV chain harrowing at warp speed 9 and wondering why the harrow is just bouncing around. The design of chain harrows goes back hundreds of years to when they were pulled by horses – at a walking pace! I don’t advocate using chain harrows as a replacement for ‘poo picking’ in horse paddocks – it’s much more beneficial to collect the horse droppings on a daily basis than it is spread it around the paddock on a regular basis. There are also companies out there who will provide a harrowing service using horses!

Heavy Harrow

There is a fine balance in the ground between being too damp and too dry for rolling, especially when using compact tractor sized rollers which don’t exert as much pressure as large rollers, even when filled with ballast. Rolling will reduce (not eliminate) the uneven ground caused by horse poaching but it will compact the soil rather than aerate the soil so causing water to sit on the top rather than soak away and poaching if you get a sudden spell of wet weather. If there is already some spring grass growth, then rolling the crowns or seeds of the grass to crush them encourages ‘spreading’ of the grass seeds and so maximises spring growth.

If the grass cover is patchy with areas of bare ground through poaching or wet weather, I will always reseed, as the cost is minimal and it can usually be done by hand in horse paddocks. I usually harrow the ground and seed it before rolling, as this helps the seeds to stick in the ground and promote growth. However, the paddock should then be put out of action until the grass has recovered, so it is also a perfect time to spray or treat any emerging weed growth. I usually get the seed delivered by pallet load, which makes transporting it around a lot easier!

I am happy to provide a harrowing and rolling service with a compact tractor than can be trailered to sites behind a 4×4. Please contact me for quotes and prices – or see ACC Contracting Services & Products.

All the best,


New Year, New Work, New Starts…

As some of the more observant may have noticed, my Twitter feed has changed slightly from ACountryChap to ACC Contracting, as has the web address for this blog. As well as running and renovating the estate, I also have a far more mundane job. With mixed feelings, earlier this year I agreed to take Voluntary Redundancy, effective from the end of March 2016.

I decided that spending large amounts of time in an office when you suffer from chronic cabin fever was only going to make me miserable and decided I would be better off going fully self-employed. So I have!

From the end of March I shall still be the same old ‘ACountryChap’, but in the form of ACC Contracting, offering a wide range of rural, country and agricultural services across the South East. A sample of which is below (but ultimately this is a small sample of work I have done over the last few years!)

Tractor Operations (Hedge cutting / flailing, verge cutting, bank cutting, topping, rolling, ground clearance, spraying, fencing)
Excavator & Mini-Digger Operations (Tree stump removal, ditch digging, ditch clearing, track laying, ground clearance, parking areas, driveways, demolition, grading, levelling, landscaping, muck heap removal)
Menage / Paddock Maintenance (Topping, Harrowing, Rolling, Spraying, Fencing, Water Drinkers, Pipe Laying, levelling)
Hedge / Tree Cutting
Ground Clearance / Leveling
Towing / Transport
Firewood / Logs Supply (Delivery & Collection)
Grounds maintenance (Hedge cutting, grass cutting, path strimming, et cetera)
Timber Structure installation (timber bridges, field shelters, stiles, fences, stable repairs, barn repairs, cross country jump building, field drinkers)

I can take most of my plant and equipment anywhere by road and will always offer competitive rates with no hidden costs or traps, so please do ask if you have work which you’d like done, with no jobs being too big or too small!

I also have a new ACountryChap Facebook Page, and would be very grateful if you could like it and share it. Some photos of previous jobs and work I have carried out can be seen here.

As always, I am active on my ACountryChap Twitter Feed, and will continue to tweet!

All the best and thanks for your continued support,


Funges Meadow Back Stream Enhancement

Out of all the work I carry out, my favourite has to be carrying out habitat enhancement in and on rivers and river banks. Fortunately, I was contracted recently by Chiltern Rangers to carry out just that on (what could be) a lovely little chalk stream on the edge of the Chilterns in High Wycombe, Buckinghamshire.

Back Stream Funges

I knew the site well, having previously been there in an advisory capacity when Chiltern Rangers were planning some enhancements to be made to the wildlife pond which is also on the site. The stream in question is actually man made and eventually joins the River Wye (the chalkstream), but unfortunately during the construction of the artificial channel, the chalk substrate was more or less completely removed, leaving a silt / clay substrate, and the channel was widened in order to cultivate Watercress in previous decades. Immediately downstream of the site is a small brick culvert which restricts the flow, meaning that the water velocity is sluggish and a large amount of deposition has occurred. This deposition has completely covered what chalk and gravel there was left in the stream, and has completely destroyed any potential for trout to spawn in the stream – so we decided to put some back in and also relocate some of the silt into the margins to narrow the channel and create some shallow marginal reedbed habitat.

Funges Back Stream with Notes

This isn’t the easiest site to work at, access for the machine is only possible on the right hand bank (looking downstream), which is approximately 12ft above the water level. This meant that I was somewhat restricted with where I was able to access the channel with the 13t 360 tracked excavator. It also meant that creating marginal berms with the silt was a lot harder than anticipated as I was effectively working blind from the excavator cab due to the height of the bank! Fortunately, I had an ex-Sparsholt College work placement chap with me for the project, who was very helpful in pointing out the bits I had missed!

Chiltern Rangers had arranged for 15 cubic metres of mixed stone (40mm to 100mm) to be delivered in cubic metre bags to the site which was unloaded with the telehandler. Unfortunately the combination of the 7 ton telehandler, the Land Rover, a 13t 260 excavator and two days of continual rain made the access track impassable to anything except the excavator (including my trusty Land Rover, as I found out to my cost when I went to leave the site!)

The majority of the work I was asked to carry out was:

  • reprofiling the existing silty channel,
  • relocating some of the silt to the margins to create a more natural channel margin,
  • introducing the gravel and stone to the areas where woody debris items had been installed by myself, volunteers and Chiltern Rangers previously,
  • removing one or two trees and undergrowth to allow some more natural light into the stream and encourage marginal weed growth.

I spent most of the first morning with a wide grading bucket on the 13t excavator, squeezing it in between some of the trees, clearing undergrowth and attempting to reach as much of the channel as possible – which isn’t as easy as it sounds! With the banks being predominantly clay, they were very slippery and sloped towards the channel, meaning that I also had to make sure there wasn’t a chance of the excavator sliding into the channel.20160108_111018

A few hours on the chainsaw in the rain was enough to clear fell most of the smaller trees which had grown up through the bramble and open up access to the channel. My ever-helpful work placement chap donned his chesties and was providing my eyes in the channel when my view from the excavator was blocked by undergrowth or the high, steep banks – ensuring I didn’t start ‘dredging’ rather than just removing the silt. Unfortunately, within the silt (and unfortunately typical of an urban watercourse) were all manner of nasties – broken glass, metalwork, tin cans and used hypodermic needles / syringes! The silt was also a great deal deeper than we realised when myself and John of Chiltern Rangers had carried out some preliminary tests a few months before.

For this reason, I decided it wasn’t possible to deposit most of the silt on the bank as planned, and opted instead to merely scrape it into the edge of the channel to create the margins. This also meant that run-off back into the stream would be reduced from the removed spoil due to the torrential rain!

The next job was to introduce the new gravel to the channel. As the aggregate company had been kind enough to bag each size separately, it was fairly easy to install a layer of the 70mm – 100mm stone around the woody debris, and then dress it with the smaller (40mm – 70mm) gravel on top. This required some nifty footwork and balance on the behalf of my work placement chap, as essentially, I have to lift each cubic metre bag on a lifting strap with the excavator and suspend it above the water whilst he uses a long handled slasher / billhook to cut through the bottom of the bag. He then has to move safely out of the way before I can move the dipper and arm around to spread the stone equally! Fortunately, this was old hat to him and within three hours, we had all the bags of the larger stone introduced in the three locations specified on the plans.

It didn’t take much longer to install the smaller gravel on top, and three new riffles were created in areas where the channel was slightly narrower and had increased velocity anyway in conjunction with some woody debris features.

Due to the weather (it rained solidly the entire weekend) and the fact that the site is predominantly clay on top of chalk, it turned into a bog! The only access to the area had also been nicely churned up by the telehandler delivering the gravel – as I found out when leaving the site as I had to bodily drag my Land Rover out backwards with the excavator to prevent it sliding into the pond, before tracking back in and repairing the damage as I tracked the excavator out!

Chiltern Rangers are hoping to revisit the site in kinder weather, and continue with their good work in improving it as an educational facility (it already has a nature-like dipping platform on both the pond and the stream), as well as improving the habitat within the stream channel and the site. My apologies for the lousy quality of the photos in this blog – the weather and damp was playing havoc with the camera!

All The Best,


Sticky Situations…

This time of year seems to drag for me, usually (and such is the case at the moment), I struggle to get any work whatsoever completed on the estate due to the saturated ground and boggy working conditions – and consequently my To Do list is growing rather than shrinking. Any work I have been doing has mainly been contract work for other land owners and managers, and even that has been a sticky mess (and nearly resulted in my trusty Land Rover getting rather wet) with the 13t 360 tracked excavator.

However, on a lunch break from carrying out some forestry on neighbouring land, I popped back to the estate for lunch and took a rod down to the river whilst I ate, resulting in a nice winter Chub of 4lb or so. Just to prove a point, this chub was caught immediately under the Laurel trees that I had reduced earlier this year on the Top River and mentioned in Run Ragged, Run. (Excuse the fishing clothing sponsored by Stihl!)


On the plus side, not only has planning permission for the stable yard complex been granted, but the tree survey has been completed which means that I can finish removing some of the dangerous and problem trees and planting some new native species to replace those that have had to be felled!

On top of that, the Flood Defence Consent (FDC) application I sent off to the Environment Agency (EA) back in November / December 2015 was rejected on flood risk grounds. However, thanks to some negotiating, some slight amendments and the good nature of the local Fisheries Officer from the EA, it has, in part, been approved.


Originally I applied for FDC consent to excavate a small wet woodland / fish refuge / backwater just upstream of the road bridge over the river at the most downstream point of our land. That corner of our land is covered in mature Willow trees which over shade it badly and it is prone to flooding as it is low lying. Consequently, it is of no use for grazing and I consider it to be a sacrificial area. My thinking was rather than just leave it to become a mess, I should complete some relatively easy works in order that even that piece of land provides some form of positive environmental impact. The river that borders the estate is reasonably flashy, and was (prior to the dredging carried out on it in the 1950’s to the 1970’s), a nice gravelly, fast flowing river system, typical of lowland rivers in the area (think of a smaller version of the lower River Kennet – famous for it’s barbell and chub fishing!)

One of the issues in the river is the lack of habitat for fish of all year classes (ages), mainly due to the aforementioned dredging and the systematic blockage / debris removal over those years, resulting in little in-channel habitat and no marginal habitat whatsoever, along with a trapezoidal, over-wide river channel. The work I carried out earlier in 2015 (Rivers Week – Day One with Volunteers and Rivers Week – Working Alone Again) has helped restore a more natural look and feel to the river, but there is still a lack of in-stream debris which provides areas for juvenile fish to hold up in during times of high flows and prevent those important juvenile fish from being washed downstream. If those fish wash so far downstream, there are unpassable barriers such as weirs to prevent them from returning back to the reach, which can result in native fish stocks upstream of those barriers dwindling. Another method of protecting those fish is to provide an area off the main channel (and the main flow) where they can seek refuge. Hence the decision to propose the fish refuge / backwater / wet woodland which will be connected to the main channel and will have some coarse woody debris within it for additional habitat. As the spoil arising from the excavation will be taken out of the flood plain, it also (albeit only slightly) increases the capacity of the flood plain.


Sadly the FDC application to install a limited number of large and coarse woody debris items in the Top River channel has been refused by the EA as potentially causing a flood risk downstream. As I write, I am hoping that the EA will accept my offer to discuss the application on-site in more detail. Personally, I struggle to see how it could possibly exacerbate flooding downstream when the proposed location of the woody debris (far upstream of the village) will actually slow the velocity of the water down and prevent it from reaching the village as quickly as it currently does with a straight, wide, barren channel. However, we shall see if the site meeting can change the refusal. Watch this space!


Whilst I have been fairly inactive recently, it seems the criminal fraternity has not! Just before Christmas I had several of the existing outbuildings and barns broken into (despite the new perimeter fencing), although nothing was taken. It’s only right that I thank the Thames Valley Police Neighbourhood Rural Crime Officer for her prompt attendance and help – it’s the third occasion since the estate was purchased in November 2014 that similar offences have occurred. I also had three males with Saluki dogs and Lurcher dogs pop up in the field on the other side of the river at dusk yesterday, who saw me coming across the river to intervene and veered off at speed. This resulted in another call to Thames Valley Police and prompt attendance by local officers again. Three males were stopped by the officers a short distance down the road close to more farmland, searched and given their marching orders. I had no doubt they were looking for hare to course, and it seems neither did the attending officers.

All the paddocks have now been rotated for grazing by the three resident horses, and even the two that were badly flooded recently have recovered. All could do with a harrow and a good roll with the tractor to level out the holes caused by the horses charging around, but I shan’t be in any rush to do it until we get some dryer weather.

Until the weather improves and the ground dries out, I shall continue to suffer from cabin fever and spending my time testing the new Nature-like Fishing Platform.

All the best,


Run Ragged, Run…

First off, apologies once again for the lack of blogs recently. When I first started blogging, I had very little confidence that people would be interested in my rural rantings ramblings, but the emails I have received (with the exception of the rather unpleasant one from the animal rights chap) have been very complimentary, so thank you all!

With the wet weather setting in I have been limited as to what I can finish off on the estate without causing damage before the spring comes and it turns slightly drier. I always knew this was going to be the case when you purchase an estate bordered by a lowland river so it is nothing that I am worried about. Most of my time has been spent in the new double garage servicing all the tractor implements, repairing and servicing the tractor itself, repairing the mini-excavator and the other bits and pieces such as the big ride on mower. (See Tuna, Trials and Tribulations for the full list.) The mini-excavator bushes particularly needed replacing which took me all day and the biggest sledge hammer I had.


We have now moved three of the horses onto the estate, and the horse rail around the perimeter track along the river and the temporary electric fencing in the fields is working well. The fields down towards the bottom of the estate are being used first as they will (at some stage in the winter) flood and become unusable. The horses had been testing the electric fencing when it wasn’t live (see below) and pushing their luck, and after they made a bid for freedom I decided it was time to electrify it. All three have now become acquainted with the fence now it is live and their urge to escape to the greener grass on the other side has (thus far) been curtailed!


The current thorn in my side is the local authority planning department, who so far have put us six months behind schedule. This has meant I had to spend some very longs days (well into the night) clearing stored materials and building a small hard standing and erecting two temporary stables and a storage room.

20151110_164250_resized_2 20151110_164109_resized_1

This was just so we could move three of the horses in prior to the permanent stable complex being built (it should have been completed three weeks ago according to the schedule I had!) This wasn’t what I had in mind, with the work taking place between rain showers and extricating stuck delivery HGV’s from one of the fields with the tractor! This meant the work took even longer as I had to use the compact tractor to ferry one ton bags of MOT Type 1 across the fields in preference to towing HGV’s out! Even now, I am awaiting their response to the tree survey report before I can carry on with the routine tree works, which was work I had planned through the winter!

20151115_102802_resized_2 20151115_110103_resized 20151115_105524_resized_2


Fortunately the temporary stables are now in place and put to good use, along with some running repairs to the pair of elderly stables already present on the estate. They will last us through the winter until the new stable yard and barn is completed in 2016. It does however, unfortunately mean that both the hay bales and haylage bales are being stored outside through the winter as all the existing barns are in use, a situation which isn’t ideal.

My planned work this month, fortunately, has been completed, with the new panel fencing installed along both sides of the footpath for privacy and security, new double vehicle gates giving access across the footpath to the weir pool paddocks and top river. New vehicle gates have also been installed in the main access to the paddocks off the access road, with additional security measures.

20151202_125008_resized_2 20151202_125020_resized_2 20151202_125123_resized_2 20151202_125112_resized_2

Most of the tree waste from the ground clearance in the weir pool paddocks has been burnt off or logged, but the old chicken coop remains. It now looks even more forlorn and abandoned than it did prior to the work but it’s not pressing enough to take up time on before the demolition of the old stables and barns to make way for the new builds.

There are still the wildly overgrown laurel trees on the very downstream beat of the Top River to cut back and the bank height to reduce as per a previous Flood Defence Consent. This is nice gravel with some fines in it and will work well at narrowing the channel in places and creating some new gravel riffles to enhance spawning. The Top River is devoid of macrophyte growth for much of its length, and this is down to the fact it is all over shaded by the bank side trees. Reducing the height and thickness of these should result in some submerged macrophyte growth and encourage fish to hold up in a channel which is otherwise devoid of cover (until I get some Large Woody Debris items installed in it).

The muck heap / compost heap has reduced in size fortunately, as I have been moving the rotted down areas to strategic points in the formal garden and it has been mixed with those beds that have been dug over with the mini-excavator. I have trained the father well it seems – he has been witnessed aggressively turning it over with the compact tractor front loader to ensure it rots down quickly.


Log deliveries have been going well, and the locals seem well used to me driving around the village in the tractor with a ton bags of logs on the front loader. I worked out I had delivered 28 ton bags in the past month, which is pretty good going by my reckoning!

As always, any fisheries, equine, agriculture, estate management or similar students who would like work placement or work experience are welcome to contact me on

I shall keep you updated on progress, but I have been spending a fair amount of time carrying out work on other sites and estates, as well as in the office (and shooting and hunting when I have had the time.) In fact, that reminds me – I have 30 pheasants hanging in the barn which need sorting so I must go. I also have a very long ‘To Do’ list still!


All the best and a very Merry Christmas to you all,


Nature-like Fishing Platforms

As a result of the habitat enhancement and bank reprofiling carried out earlier in the year, some areas of the new banks are slightly wetter than I would like them to be. The wet summer and the fact that this is only the first year of vegetation growth on them means that there isn’t a lot of support in the margins from the root structure.

This is good for the aquatic environment, as it provides that semi-wetland marginal habitat for reeds and marginal plants which in turn provide marginal cover for juvenile fish, invertebrates and small mammals (including, unfortunately, my nemesis – the mink!).

However, it does mean that the banks are starting to erode and become very boggy in areas where the rods like to fish from, which is only going to increase through the winter with the limited vegetation dying off and the expected higher water levels. So I came up with a solution – build some nature-like fishing platforms which would be in keeping with the natural banks whilst providing some firmer areas to fish from and prevent the boggy areas from getting worse. This method of building them works well on steeply or gently sloping banks, but on steep banks some digging will be needed to be able to key the sides of the platform back into the bank, whilst ensuring the actual platform is more or less horizontal and level.


To do the work I needed the following:

10 x        6ft untreated pointed Chestnut stakes (half round / quarter round) 3-4”

1 x           Reel of 2mm galvanised fencing wire

1 x           Willow trunk approximately 8ft long by 2ft diameter

2 x           Willow trunk approximately 5ft long by 2ft diameter

2 x           8ft Hazel faggot bundles

Tools     Chainsaw, post rammer, post maul, claw hammer, 40mm fencing staples, shovel, large pry bar, fencing pliers, 150mm hex head decking screws, battery electric drill.

In addition to the above, a tractor with a front loader for moving the trunks and an excavator to level the bank slightly / dig the trunks in would have been helpful. I would normally have scraped out trenches for the trunks, but the ground was so wet I didn’t want to risk it! I have to say though, please don’t use any of the kit unless you are suitably experienced and trained and have the correct protection.

I started off by selecting a good site for the platform – in this case behind a hinged willow branch, where the ground is soft and immediately upstream of a nice gravel run alongside a reed bed that looks like an ideal glide for summer barbel. I knocked in three of the chestnut stakes to make the front edge of the platform (the stakes need to be spaced out to the length of the longest tree trunk you are going to use, in my case around 8ft long).


I then scraped a shallow trench behind the stakes, wide enough to lay two 8ft long hazel faggots in. I used faggots rather than just placing the trunk in straight on the mud to prevent it sinking over time, and also allowing the vegetation to grow out through the faggots along the front of the platform next year.

I risked getting the tractor close enough to roll the main 8ft long trunk off the log grab and onto the top of the faggots, and squashed it down with the front loader before trimming the end to suit with the chainsaw.

A fourth post was added in the middle on the rear of the trunk (the inside of the platform) to allow it to be wired down (only in the middle, you’ll see why later) and then the middle posts knocked in some more to hold the trunk down to the ground and prevent movement. Tourniquet the wire up and then staple it to the posts as low down as possible. The posts can then be knocked in some more using the post maul to tighten the wire and pull the trunk down flush with the ground / faggot bundles underneath.

I also used a 150mm decking screw through each of the posts for added security before cutting the top of the posts off as low down as I could. In hindsight, with the wire I wish I had cut a small groove across the top of the trunk with the chainsaw to allow the wire to lie flush – I can see landing net mesh catching on it in the future!

The two sides of the platform were made up from the two remaining shorter (5ft) trunks set a right angles back from the main trunk, and I scraped out the area they would lie in by hand to make them lie more or less level. A stake at each end on the outside and one in the middle on the inside works pretty well. The stake on the inside won’t be seen or above the ground once the platform is infilled anyway, so it doesn’t matter.

I then wired across the trunks from end to middle to end on each one, knocked a fencing staple into each post to hold the wire and knocked the posts down some more with the post maul to secure them, before cutting the posts off as low as possible with the chainsaw.


Essentially, the platform is more or less complete now – I tided the corners on mine up with the chainsaw because I was feeling pedantic. The platform can then be infilled with some decent firm material (Type 1 or scalpings will work well) which can be blended back into the natural bank, but will still ‘green up’ with vegetation. I shall probably use a layer of geotextile (coir matting) inside the platform as a retaining ‘bag’ to prevent the material from being washed out in the event of high flows over the winter. However, the infilling can wait until the ground is dry enough to back the tractor trailer down the bank without causing too much damage to the ground.

Another method of finishing the platform is to use some timber (old scaffold boards, decking boards or 12″ x 2″ boards) across the top to create a decking effect and screw each one down to the trunks with a void underneath. However, I shall infill this one as I would like it to look as unobtrusive and natural as possible.

I shall let you know how it fares!


Tuna, Trials and Tribulations…

First off, apologies for the lack of blogs recently – I have just returned from ten days in Malta, enjoying good cocktails, good company and some superb fishing for Tuna and Dorado.


I had some fantastic news when I returned from fishing in Malta – the long debated and refused planning permission had been granted with one or two conditions, so the build of the new stable complex, hay barn, tractor workshop, forge, horse walker and feed barn can go ahead. After all, it is only 6 months behind schedule!

They say things break in threes – and I’m about to start repairing the second one and waiting with baited breath for the third one to materialise!

The first was the trusty Land Rover at 4am on a Saturday morning – chewing up the power steering / alternator / fan belt on my way back from a night shift. Fortunately, in true Land Rover style, it made it the ten miles home with the temperature needle barely moving. Unfortunately I wasn’t staying on the estate, but at my own property, which meant I had no spare parts, no tools and a 25 mile drive to the estate. Instead I opted to call the AA, who turned up promptly, stripped the remains of the chewed up belt out from the engine bay, disappeared off to find a new belt and then returned to fit it. I couldn’t have asked for better service really!

20151017_115946 20151017_115954


The second was the 45hp compact tractor (whilst I was away my father was given instructions to top the fields if the grass got too long). It seems that somewhere between topping fields he managed to shear the top-link off the rear of the tractor, bending and shearing the mounting bolts and cork-screwing and then snapping the PTO shaft to the topper and bending the gearbox mounts. Don’t ask me how, although I suspect the grass is probably too long and too thick for the topper in fairness!


Unfortunately this meant that my plan of finishing off the existing pile of trunks and limbs for firewood with the log splitter was scuppered. After loading bulk bags with what was already split, I tidied the log barn and made a start of carving the stump of the large oak tree I dismantled and felled almost 12 months ago. It will eventually be a bench which should be on the edge of the stable yard and a suitable location to enjoy a cup of coffee after mucking out in the summer!

20151017_172545 20151017_172533 20151017_172526 20151015_163315 20151003_105514

I did have a minor incident one afternoon when we lost all water supply to the house and grounds. A little bit of investigation along the drive by the gates with the mini-digger established that the original metal mains water in pipe had ruptured. After turning part of the front paddock into a passable imitation of the Western Front, complete with trenches and mud, a handy plumber friend of mine managed to run a new water pipe in a hastily dug trench and restore order!


On the river front, not much has changed. There have been a few nice Chub up to 6lb caught, one or two Barbel in the 5lb bracket and one less Mink to contend with after one ended its days in one of the cage traps set down by the Pollarded Willow. The banks are still nice and green and the grass track around the lower fields along the river bank has recovered from the dry summer nicely. The horse rail perimeter was finished whilst I was sunning myself on the boat in Malta!

20151015_094950 20151015_095028 20151015_095120 20151015_095252

It’s getting towards the time of year when work outside is brought to a minimum due to the weather, and I concentrate on any maintenance to see the estate through the winter. So far I have:

  • Repairs to the tractor (see paragraph four),
  • Service and renew some worn parts on the tractor(s),
  • Service, clean and recondition all the chainsaws,
  • Repair the minor hydraulic leak on the flail, service, sharpen and grease it,
  • Service the mini-digger, replace some bushes and repair the minor oil leak,
  • Service the Land Rover,
  • Repair the ride on lawn mower,
  • Repair the interior wall in one of the mower barns,
  • Move the compost heap and spread on one of the areas earmarked for a new rose garden,
  • Finish burning off the old fencing, brash and scrub from the ground clearance in the Weir Pool Paddock,
  • Erect new panel fencing along the footpath across the estate,
  • Demolish the old chicken coop and remove the concrete base in the Weir Pool Paddock.

All the best,